Project EV Apex 7S installation on a side wall in Yarm
A Project EV Apex 7S fitted on the side wall of a house in Yarm, right beside the driveway. The circuit runs from the external meter cabinet through its own IP65 consumer unit, with the cable clipped low along the brickwork.



The job
The homeowner in Yarm wanted to plug in straight from the driveway. The side wall of the house runs right alongside where they park, so that is where the charger went.
They chose the Project EV Apex 7S, an untethered smart charger. It has a Type 2 socket rather than a fixed lead, so the car’s own cable plugs into it and nothing is left hanging on the wall between charges.
Wiring from the external meter cabinet
The electricity meter sits in an external cabinet on the same wall. We fed the new circuit directly from there into a dedicated IP65 consumer unit mounted beside it. IP65 means the enclosure is sealed against dust and jets of water, which is what kit that lives outdoors needs. It is labelled EV Charger, so the homeowner knows what it is for.
From the consumer unit, the cable is clipped neatly along the lower brickwork, under the gas meter box, to the charger. Keeping it low keeps it unobtrusive.
Tested and certified
Once it was fitted, the installation was fully tested, commissioned and certified to BS 7671, the UK wiring regulations.
The Project EV Apex 7S is the lowest-priced charger we fit, at £800 fully fitted. If it suits your home, send two photos through the quote form and we’ll confirm your fixed price before you book.
More on how we fit home chargers, and the fixed fitted prices for each one: home ev charger installation.
